*Salve sono JackieALF, e in questa guida mostrer come procedere in modo preciso all'Installazione del Programma Ableton Live 12 Suite.
Avvalersi degli Screenshots dall'apposita cartella effettuati dal sottoscritto per una miglior comprensione:
Procedura di Installazione
1. All'interno del Torrent presente un file txt "readme" con le istruzioni in inglese, non realizzate dal sottoscritto e che descrivono come procedere, ma in modo molto approsimativo e confusionario tanto che non si capisce esattamente come fare...
Allora ho deciso di realizzare a mia volta, questo file di testo, sia in italiano che in inglese, che spiega passo per passo e molto chiaramente cosa ho fatto.
In realt sono dovuto andare un po' per intuito pi che altro per la Cura
Inizialmente la procedura che ho eseguito per curare il programma non era corretta...
Infatti, copiando la "Patch" all'interno della cartella di installazione del Software dava come messaggio che tutto era andato a buon fine, ma lanciando Ableton Live 12, restitutiva sempre il messaggio che era necessario autorizzare il programma...
Vedere immagine 1
In seguito ho proceduto in un'altra maniera, e tutto filato liscio dopo aver speso molto tempo e pazienza...
2. Disconnettersi da Internet, escludere tutta la cartella "Ableton Live 12" aggiungendola alle esclusioni nel proprio antivirus onde evitare che il keygen potrebbe non funzionare od essere eliminato in qualche modo.
Decomprimere il contenuto dei 2 Files Rar "Ableton Live Suite v12.0.1 64 Bit part 1 e part 2.rar" che si trovano nella cartella principale "Ableton Live v12.0.1 64 Bit) [MultiLang] + Content Pack" dove pi si vuole.
Screen 2 e 3
3. Aprire poi la cartella decompressa "Ableton Live v12.0.1 64 Bit" e in essa avviare "Ableton Live 12 Suite Installer" per l'installazione del Software.
Cliccare dunque su "Install", ed in seguito su "Welcome to the Ableton Live Suite 12..." premere Next e spuntare la voce "I Accept the terms..." scegliere il percorso di installazione (di default in Disco Locale C:) ed in sequenza "Next" ed "Install".
Attendere il completamento dell'Installazione e cliccare su "Finish" e poi "Close".
Screenhots da 4 a 13
4. Avviare Ableton Live 12.
Vedere immagine 14
Selezionare "nessuna connessione Internet su questo computer" che si trova in Opzioni->Preferenze->Licenses & Updates), salvare il numero seriale (ID Hardware) sotto forma di txt dove pi si vuole.
Immagini 15,16,17,18
Chiudere Ableton Live 12.
5. Tornare nella cartella "Ableton Live v12.0.1 64 Bit" ed aprire la Folder "Patcher and keygen", estrarre "Ableton keygen.exe ed avviarlo.
Nel riquadro che si apre incollare il numero seriale precedentemente salvato nel file di testo, inserire il numero di versione di Ableton Live ovvero 12.
Premere un tasto qualsiasi...
Screens 19 e 20
A questo punto, si sar generata la licenza "Authorize" che si trover nella posizione o cartella da dove stato eseguito il keygen.
Immagine 21
Adesso, lanciare il programma Ableton Live 12, spostarsi in "Opzioni->Preferenze->Licenses & Updates"...ridimensionare la finestra principale di Ableton Live 12 da schermo intero a circa met schermo, ed in essa trascinare con il tasto del mouse senza rilasciarlo la licenza generata "Authorize" come nell'esempio.
Se tutto sar stato effettuato correttamente, allora ci si ritrover con il messaggio "Autorizzazione di Live completata con successo"
Vedere screenshots 22 e 23
6. E' possibile cambiare anche la Lingua tra quelle disponibili nelle Preferenze nella Voce "Display & Input"
Immagine 24
7. Bloccare il software nel proprio firewall e accertarsi sempre che in "Opzioni->Preferenze->Licenses & Updates"
la voce "Ricevi Aggiornamenti Automatici" sia settata su "Mai".
8. Per installare invece i "Content Pack" procedere come segue.
In "File" selezionare "Install Pack" e scegliere quello che pi aggrada tra quelli disponibili.
L'installazione richieder un certo tempo a seconda delle dimensioni del plugin.
Screens 25,26,27,28 e 29
Procedura Installazione in Ita, test e screenshots by JackieALF
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hi, I'm JackieALF and in this guide I will show how to proceed precisely with the installation of the Ableton Live 12 Suite program.
Make use of the Screenshots from the appropriate folder made by Me for a better understanding:
Installation procedure
1. Inside the Torrent there is a "readme" txt file with instructions in English, not created by me and which describe how to proceed, but in a very approximate and confusing way so much so that it is not clear exactly how to do it...
So I decided to create this text file myself, both in Italian and English, which explains step by step and very clearly what I did.
In reality I had to go a bit by intuition for "Medicine"
Initially the procedure I followed to cure the program was not correct...
In fact, copying the "Patch" inside the Software installation folder gave the message that everything was successful, but when launching Ableton Live 12, it always returned the message that it was necessary to authorize the program...
See Image 1
I then proceeded in another way, and everything went smoothly after spending a lot of time and patience...
2. Disconnect from the Internet, exclude the "Ableton Live 12" folder by adding it to the exclusions in your antivirus to avoid that the keygen may not work or be deleted in some way.
Unzip the contents of the 2 Rar files "Ableton Live Suite v12.0.1 64 Bit part 1 and part 2.rar" located in the main folder "Ableton Live v12.0.1 64 Bit) [MultiLang] + Content Pack" wherever you want .
Screens 2 and 3
3. Then open the unzipped "Ableton Live v12.0.1 64 Bit" folder and run "Ableton Live 12 Suite Installer" in it to install the Software.
Then click on "Install", and on "Welcome to the Ableton Live Suite 12...", press Next and check the item "I Accept the terms..." choose the installation path (by default in Local Disk C :) and in sequence "Next" and "Install".
Wait for the installation to complete and click on "Finish" and then "Close".
Screenshots 4 to 13
4. Launch Ableton Live 12.
See image 14
Select "no Internet connection on this computer" located in Options->Preferences->Licenses & Updates, save the serial number (Hardware ID) as a txt wherever you want.
Images 15,16,17,18
Close Ableton Live 12.
5. Go back to the "Ableton Live v12.0.1 64 Bit" folder and open the "Patcher and keygen" folder, extract "Ableton keygen.exe and run it.
In the box that opens, paste the serial number previously saved in the text file, enter the Ableton Live version number, 12.
Press any key...
Screens 19 and 20
At this point, the "Authorize" license will have been generated and will be located in the location or folder from where the keygen was executed.
Image 21
Now, launch the Ableton Live 12 program, move to "Options->Preferences->Licenses & Updates"...resize the main Ableton Live 12 window from full screen to approximately half screen, and drag in it with the mouse button without releasing the generated license "Authorize" as in the example.
If everything has been done correctly, then you will find yourself with the message "Live authorization completed successfully"
See screenshots 22 and 23
6. It is also possible to change the Language among those available in the Preferences "Display & Input"
Image 24
7. Block the software in your firewall and always make sure that in "Options->Preferences->Licenses & Updates"
the "Receive Automatic Updates" option is set to "Never".
8. To install the "Content Packs" instead, proceed as follows.
In "File" select "Install Pack" and choose the one you like best from those available.
The installation will take some time depending on the size of the plugin.
Screens 25,26,27,28 and 29
Installation procedure, test and screenshots by JackieALF