#******************************************************************************************
#
# this file is configuration for each factory remote device
#
# factory_code each device has it's unique factory code.
# pattern: custom_code(16bit) + index_code(16bit)
# examble: 0xff000001 = 0xff00(custom_code) + 0001(index_code)
#
# work_mode 0 :software mode 1 :hardware mode
# repeat_enable 0 :disable repeat 1 :enable repeat
#
# release_delay unit: ms
# release will report from kernel to user layer after this period
# of time from press or repeat triggered.
#
# debug_enable 0 :debug disable 1 :debug disable
#
# SW MODE:
# bit_count how many bits in each frame
# tw_leader_act time window for leader active
# tw_bit0 time window for bit0 time.
# tw_bit1 time window for bit1 time
# tw_repeat_leader time window for repeat leader
# REG:
# reg_base_gen set value for PREG_IR_DEC_BASE_GEN
# reg_control set value for PREG_IR_DEC_CONTROL
# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE
# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE
# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME
#******************************************************************************************
# TVIP-S410
factory_code = 0xfe010001
work_mode = 0
repeat_enable = 1
repeat_delay = 130
repeat_peroid = 120
release_delay = 20
debug_enable = 1
fn_key_scancode = 0x03 #MOUSE
# left_key_scancode = 0x25 #LEFT
# right_key_scancode = 0x27 #RIGHT
# up_key_scancode = 0x26 #UP
# down_key_scancode = 0x28 #DOWN
# ok_key_scancode = 0x0d #OK
mouse_begin
# 0 0x25 #LEFT
# 1 0x27 #RIGHT
# 2 0x26 #UP
# 3 0x28 #DOWN
mouse_end
key_begin
0x1c 116 #Power
0x5f 164 #PLAYPAUSE
0x19 128 #STOP
0x56 398 #RED
0x57 399 #GREEN
0x1f 400 #YELLOW
0x5b 401 #BLUE
0x09 104 #PAGEUP
0x01 168 #REWIND
0x58 208 #FASTFORWARD
0x05 109 #PAGEDOWN
0x47 105 #LEFT
0x07 106 #RIGHT
0x1a 103 #UP
0x48 108 #DOWN
0x06 28 #ENTER (OK)
0x08 102 #HOME
0x17 1 #ESC (BACK)
0x49 46 #CONTEXTMENU
## 0x52 nn #MOUSE (dont use this line, key is mapped in fn_key_scancode)
0x0c 11 #No.0
0x54 2 #No.1
0x16 3 #No.2
0x15 4 #No.3
0x50 5 #No.4
0x12 6 #No.5
0x11 7 #No.6
0x4c 8 #No.7
0x0e 9 #No.8
0x0d 10 #No.9
0x10 14 #BACKSPACE
0x5e 23 #INFO
0x55 171 #CONFIG
0x42 113 #MUTE
0x4f 114 #VOLUMEDOWN
0x4b 115 #VOLUMEUP
key_end
repeat_key_begin
0x47 105 #LEFT
0x07 106 #RIGHT
0x1a 103 #UP
0x48 108 #DOWN
0x4f 114 #VOLUMEDOWN
0x4b 115 #VOLUMEUP
0x10 14 #BACKSPACE
repeat_key_end